Chery Karry, User Manual, Page: 94 / 131

Repair & Maintenance
94
Windscreen cleaning fluid
reservoir
The cleaning fluid for front windscreen is
supplied by the reservoir. Mix clean water
and windscreen cleaning fluid with the
concentration of 1:20 if necessary. There is
no MAX and MIN marks for the reservoir.
Fluid shall be refilled in time when the
cleaning fluid is nearly finished. Reservoir
cap shall be covered well after refilling.
Check wiper blade
Slide your fingertip on the edge of the
wiper blade to check its coarseness. The
butter, silicone resin and fuel may result
the wiper blade failure to work. It is
recommended to use the windscreen
cleaning fluid to clean the wiper blade.
Replace wiper blade
Raise the wiper arm until it is
perpendicular to the wiper blade. To
remove the wiper blade, press down the
retaining clip in the arrow direction,
release the wiper blade and then pull away
the wiper arm in the reverse direction.
Tire
For the sake of safety, when refueling,
please check the pressure of tires (incl.
spare tire) after these tires cool down. For
the details, refer to the tire pressure
recommended in the chapter “Capacity
and Specification”.
Comply with the correct tire pressure in
particular when the vehicle travels at
heavy load and high speed. The tire
pressure insufficient may reduce the
stability of the vehicle, increase the rolling
resistance and quicken the wear of tire,
and also result the damage which may
cause the traffic accident.
If you have to drive your vehicle on the
edge of road, you slowly drive it only. If
possible, the wheel shall vertically
approach the roadside. Avoid the
upstanding obstacles with sharp edge.
Take care not to scratch the lateral wall of
tire when the vehicle stops.
Regularly check whether there are the
flesh cut, foreign material and uneven
wear on the surface of tire. The uneven
wear of tire tread indicates that the wheel
alignment may be wrong.