Chery Karry, User Manual, Page: 30 / 131

I. Introduction of Vehicle
Functions
Steering wheel lock/
ignition switch
Explanation for lock-hole positions of
steering wheel:
Position 1- Turn off the ignition switch
and lock the steering wheel. Please turn
the steering wheel until a click of steering
wheel locked is heard after pulling off the
key in order to lock the wheel. Radio and
horn shall not work in the position.
DO NOT pull out the key
before the vehicle parking
completely to avoid locking
the steering wheel unconsciously.
Position 2- Switch on the ignition circuit
If the key cannot be or difficult turned to
the position, it may slightly turn the
steering wheel and then the locking
mechanism of steering wheel will be
unlocked.
Position 3 – start the engine
When the lock hole is at the position, the
headlamps and electrical equipment that
consume more power will be switched off
fully.
There is an anti-restart device in the
ignition switch. Once the engine starts, the
device may prevent the engine mis-start,
so that it can avoid the damage from
engine and flywheel of engine. If the
startup is not successful, the ignition key
must be turned to Position 1 and then
Position 2 before restart
Horn
Press down the button on the
steering wheel to operate the horn. The
horn can be operated only under the case
of ignition switch on.
The key must be loosened
once the engine is started.
DO NOT remain the key at
Position 3 for a long time.