Chery Karry, User Manual, Page: 62 / 131

Safety
62
Engine bonnet
Open
1. Pull back the engine bonnet handle
that is positioned at the front left part
of the driver’s seat, the bonnet will
pop out a distance upward.
2. There is a small handle in the right
side of the net in the front of engine
bonnet, pull the small handle forward
in front of the vehicle and lift the
engine bonnet up, the bonnet can be
opened.
3.
Lift the engine bonnet and use the
support rod in the front of engine
compartment to support the bonnet.
Close
1. Put down the support rod in the front
of engine compartment and place it
in the slot for fixing the rod.
2. Fall the engine bonnet down to the
place 20-30cm away from the
bonnet lock first when putting down
the engine bonnet, and then let it
freely drop to the lock claw for
close.
3.
Lifting the bonnet is required after
the engine bonnet is closed to
conform it whether matched
completely.
Ensure the engine bonnet is
closed firmly during driving.
The vehicle must be stopped
immediately if you find the engine
bonnet is not closed well. Re-driving
is not allowed before the bonnet is
well closed.
Fuel filler cap and fuel tank
cover
Cable
Handle
Handle
Support rod