Chery Karry, User Manual, Page: 67 / 131

Safety
67
Adjusting method of headrest
：
Pull upward or push down the headrest to
the proper position after pressing and
holding the spring clip;
The best headrest height is that its top end
is level with the head top.
Headrest removing and
assembling method
：
Push down and hold the spring clip at the
external side of the headrest guiding
element and pull out the headrest from the
guiding element as removing the headrest.
In the assembly of the headrest,
distinguish the front/ rear seat headrests
first and then push the headrest pin into
the guiding element, till the spring clip on
the guiding element engages with the pin
correctly.
Middle row headrest
The adjustment method for middle row
headrest is the same as the front one.
Note: DO NOT remove
the headrest or adjust it
to the excessive low
position so as to avoid the neck
damage due to lack of support to
the head in the collision. The
headrest shall be adjusted to the
proper position.
Middle row seat
Folding of middle row seat
Firstly, lift up the middle row seat cushion,
and then pull it forward; pull the “pull
rod” as shown in the figure above upward
and fold the seat backrest to the arrow
direction shown in the figure.
Seat cushion state as folding the
middle row seat
It requires folding the middle row seat
cushion first when folding the middle row
seat. The method for folding the middle
row seat cushion: lift up the middle row
seat cushion first, pull it forward, and then
put it down vertically. The state of folded
middle row seat cushion is shown in the
figure below.
Pull rod
Headrest is optional