Chery Karry, User Manual, Page: 117 / 131

Quality Warranty Service
117
shortage of proper examination and
maintenance, the Chery Company will not
be liable for the warranty service.
This instruction manual specifies the
necessary maintenance items. After such
items are executed, please record the
results in this instruction manual, and keep
it carefully. When accepting warranty
service, you must bring forth this
instruction manual.
5) Severe failures result from the
problems that owner should have
discovered and handled, but ignored.
Hint:
For example, during the routine
inspection, it has been found that
engine oil warning light gives an
alarm, or the driver feels something
abnormal (noise, vibration) while the
vehicle has not been overhauled in
time and continues in service till
severe failure occurs
.
6) Faults caused due to the use of
products other than the genuine spare
parts and specified grease (including
engine oil, brake fluid, transmission
oil, and fuel).
Hint
: The prerequisite for this warranty is
to properly use the genuine spare parts and
specified grease so as to ensure the normal
operating of the vehicle.
So, if the
non-genuine spare parts are used, or they
are genuine spare parts but not applicable
to this vehicle, or the grease not specified
in the instruction manual is employed, all
of these may make an influence on the
vehicle's original performance and
decrease its durability.
For example, the oil cleaner not specified
by Chery Company is utilized and then it
result the cleaner jammed and the bearing
burnt.
7) Faults caused due to the malfunction
of the vehicle and improper use of the
Instruction Manual or due to the
overuse of the vehicle that exceeds
the vehicle’s capabilities specified in
the specification (the vehicle travels
as a racing vehicle with the overload,
the engine overload, excessive
loading capacity, passenger overload,
excessive driving speed, etc).
Hint:
The malfunction of the vehicle and
improper use of the Instruction Manual or
due to the overuse of the vehicle that
exceeds the vehicle’s capabilities specified
in the specification are mainly as follows:
For example:
◆ Faults caused due to driving at
harsh area or racing.
◆ Overloading or excessively
pressing chassis spring.
◆ Engine failure caused due to the
operation with overload, and the
excess of the transmission limit
specified in the Instruction
Manual when the vehicle travels
at high speed.
2. The following symptoms cannot be
deemed as faults, without the warranty.
1) The symptoms caused due to the wear
or the long period of service time.
(Natural fading or degeneration of
painted surface, plating surface, resin
parts, etc.)
Hint:
Among the parts consisting of an
automobile, some of them (e.g. clutch disc)
are subject to be continuously worn with
the driving and repeated operating.
In addition, the brake lining and other
parts which implement its function by