Chery Karry, User Manual, Page: 55 / 131

Introduction of Vehicle Functions & Instruction of Designation
55
Parking/ position indicator
lamp
The indicator lamp lights when the
position lamp is switched on.
Seat safety belt alarm lamp
It has no warning if the safety belt has
been fastened before the ignition switch is
turned on. The alarm lamp lights and the
buzzer buzzes for 3 seconds if the safety
belt has not been fastened as ignition for
reminding the driver to fasten the belt. If
the safety belt is not fastened after 3
seconds, the alarm lamp will continuously
light till the safety belt is fastened. If the
safety belt is fastened in 3 seconds, the
alarm lamp will be off, but the buzzer will
keep buzzing for 3 seconds.
Engine fault alarm lamp
When the ignition switch turns on, the
alarm lamp lights and the electrical control
system of engine is under self- inspection
state. The lamp will be off in 6 seconds if
the system has no fault. The engine must
be checked if the lamp lights constantly.
If the lamp lights during driving, it means
the electrical system of engine failed.
Please get to the Chery’s special service
station to have it checked and repaired as
soon as possible.
High beam indicator lamp
The lamp lights when using high beam or
the headlamp flashing.
If the braking system
alarm lamp lights during
driving, it means one of
double braking loops failed. In the
case, you should drive carefully and
get to the nearest Chery’s special
service station immediately to have
it checked and repaired by
professional technicians. In
consideration of braking
performance decreasing seriously
and braking distance increasing, you
shall keep longer distance with the
front vehicle during driving and
increase pedal pressure properly as
braking.
If the ABS alarm lamp and braking
system alarm lamp light
synchronously and constantly, the
vehicle shall be stopped immediately
under the case of ensuring safety.
Please get to the Chery’s special
service station to have the braking
system checked before your journey.