Chery Karry, User Manual, Page: 86 / 131

Emergency Procedures
86
1. Properly stop the vehicles in order to
avoid them touching each other.
2. Stop the engine and shut down all
unnecessary electrical equipment.
3. Connect the positive (+) terminal of
the low power battery to the positive
(+) terminal of the support battery
via the wire A.
4. Connect one terminal of wire B to
the negative (-) terminal of the
support battery, the other terminal to
the metal part of the engine to be
started. Position the jumper wire in
order to avoid it contacts the motion
parts in the engine compartment.
DO NOT connect to the
negative (-) terminal of the
low power battery.
5. Make sure that the jumper cable
can’t interfere with the motion parts
of engine.
Start the engine
1. The engine of vehicle equipped with
the support battery operates at the
proper high speed.
2. Start the engine of vehicle with the
low power battery. Start the vehicle
with the low power battery within
one minute as soon as possible.
3. Engines of two vehicles shall
operate for three minutes before the
down-lead is removed.
Remove the down-lead
y
Remove the down-lead B (-) first and
then down-lead A (+).
Tow truck
There are trunk rings equipped at the front
and rear of the vehicle in order to install
the tow cable.
During towing, slowly and smoothly travel
to avoid the tow truck bounces. The big
tow force may damage the vehicle.
During towing, the ignition
switch of the vehicle to be
towed shall be placed on the “ON”
position to make the steering wheel,
turn signal lamp and stop lamp
work. Since the engine extinguishes,
there is no brake boost and steering
boost. The required operating force
need to be increased. So, the power
of brake and steering shall
correspondingly increase.
To reduce the voltage
surge during removal,
please turn on the blower
and electric heating type rear
windscreen of the vehicle with low
power battery. Please DO NOT
turn on the headlamp to substitute
the electric heating type rear
windscreen; otherwise the surge
voltage may burn out the bulb.