Chery Karry, User Manual, Page: 68 / 131

Safety
68
Rear row seats
There are two rear row seats, which are
symmetrically left to right as shown in the
figure below.
Removing and assembling method
for rear row seats
Removal: Pull the pull rod in the figure
below and push it forward with hand, draw
the rear row seats with another hand
upward, and then pull the seat backward to
remove it.
Assembly: Align two grooves in the front
of the seat with two corresponding rings in
the vehicle, put down the seat with slight
force to make the two grooves clipping in
place. In addition, shake the seat to check
whether it fixed firmly.
Luggage conveyance
The rear part of vehicle may have enough
space to accommodate luggage by folding
the middle row seat.
Luggage and other loaded
articles shall be placed as
forward as possible in the
luggage boot. It is extremely
dangerous to drive the vehicle with
opened tailgate. Excessive exhaust
gas may be inhaled in the vehicle
through the opened luggage boot
door.
DO NOT exceed the height of
front row seat when stacking
articles such as luggage.
DO NOT let passengers sit on the
folded seatback during driving,
because unbonded luggage on the
folded seatback and passengers
without protection device may collide
inside the vehicle or may be thrown
out of the vehicle in sudden brake or
accident, which may result severe
injury or death.
Pull
Front groove
Rear groove