Chery A21 2005, Service Manual, Page: 73 / 475

Chery Service Manual for A520 Body Dimension and Accessories
11
9. Applying the bonding agent: Cut off the
tip of the pot, fill the bonding agent into
the pot, place the pot into the sealant gun,
and then apply the bonding agent on the
glass as shown in the figure;
Figure 177
10. Installing the glass
①
To install the glass, align the reference
marks on the glass and the body, and
then lightly press the glass into from the
edge.
Figure 178
②
Apply the bonding agent on the edges of
the glass with a scraper
③
Clear the excessive or over flown
bonding agent with a scraper
④
Clamp the glass until the bonding
agent is harden
11. Check for water leakage and repair it
①
Perform the leakage test after the
hardening period
②
Seal the leakage part with sealant
Fit the outer lower moulding of the rear
window, fit the moulding on the body and tap
it lightly to fasten it, connect the leads
connector of the defroster, and last re-install
the disassembled parts.
Figure 179
PDF created with pdfFactory Pro trial version www.pdffactory.com