Chery A21 2005, Service Manual, Page: 124 / 475

CHERY A520 SERVICE MANUAL CHASSIS
43
SECTION II FRONT WHEEL ALIGNMENT
I. CHECK AND REGULATE THE
FRONT-WHEEL KINGPIN CASTER
ANGLE,
FRONT-WHEEL CAMBER
ANGLE, FRONT-WHEEL TOE-IN
ANGLE AND STEERING ANGLE:
Criteria: Front wheel alignment should meet
the requirements as follows:
Kingpin caster
angle
2
0
50
′±
30
′
Front wheel
camber angle
0
0
±
10
′
Front wheel
toe-in
5
′ 47 ＂± 5 ′ (or
1mm)
Kingpin
inclination angle
12
0
35
′±
30
′
II. FRONT WHEEL TOE-IN AND
STEERING ANGLE ADJUSTMENTS
1. Front wheel toe-in
Toe-in adjustment can be done by use of
optical test instrument or mechanical toe-in
regulator. Wheel aligner or alignment tester
should be installed on the wheels.
Installation should be carried out according
to the concrete instructions of the equipment
manufacturers.
(1) To meet the requirement of test
instruments,
you should make
preparations for the wheel alignment,
and use the steering wheel limiter
purchased on the market to fix the
steering wheel in the right ahead
position .( The steering wheel must be
at the central position
±
5
°
, and the
lower clamping flange bolts of steering
shaft must be horizontal.)
PDF created with pdfFactory Pro trial version www.pdffactory.com