Chery A21 2005, Service Manual, Page: 102 / 475

CHERY A520 SERVICE MANUAL CHASSIS
10
3) Uplift the fixing bracket of brake
caliper, and take out the brake lining.
Check the thickness of friction wafer, and
replace it if it cannot meet the requirement.
Note: When replacing friction wafer, please
replace it in pair.
4) Disassemble the brake cylinder. The
disassembly sequence is as the same as
that of the rear brake cylinder.
3.5 Assembly of brake caliper
The assembly sequence is opposite to
disassembly sequence.
SECTION IV REPLACEMENT OF
HANDBRAKE CONTROL CABLE
Needed tools: flat-tip screwdriver, ratchet
wrench, ratchet rod, 10#, 13# sleeves,
carry-on wrenches, torque wrench and vice
clamp.
4.1 Disassembly sequence:
1) Use screwdriver to pry out the edges of
central armrest box, and dismount the
central armrest box.
2) Use cross-head screwdriver to loosen
the fixed screws connecting the rear air
outlet and bracket.
PDF created with pdfFactory Pro trial version www.pdffactory.com