Chery A21 2005, Service Manual, Page: 60 / 475

51
7 Replacement of Crankshaft and Thrust
Washer
7.1 Needed tools and auxiliary materials
A set of open end wrenches, a set of sleeve
tools, one small crane, Le Tai glue, engine
oil, feeler gauge and micrometer guage.
7.2 Process of removal
1) Lift down the engine (detailed methods
are shown in the
“
lifting and installation
of engine
”
).
2) Discharge the engine oil.
3) Dismantle the engine timing belt
(detailed methods are shown in the
“
replacement of timing belt
”
).
4) Dismantle the engine accessories such
as engine A/C compressor, power
steering pump and bracket.( detailed
methods are shown in the
“
replacement
of engine accessories
”
).
5) Dismantle the engine cylinder head
assembly (detailed methods are shown
in the
“
replacement of cylinder head
”
).
6) Dismantle the clutch pressure plate,
flywheel and timing belt pulley.
7) Dismantle the oil pan and oil
strainer.(detailed methods are shown in
the
“
replacement of oil span and
strainer
”
.
8) Dismantle the piston connecting rod
assemblies of four cylinders, place them
well in order.
9) Dismantle the oil pump assembly
10) Dismantle the lower frame of cylinder
block, and then you can take out the
crankshaft and thrust washer.
PDF created with pdfFactory Pro trial version www.pdffactory.com