Chery A21 2005, Service Manual, Page: 107 / 475

CHERY A520 SERVICE MANUAL CHASSIS
15
SECTION VI REPLACEMENT OF
BRAKE MASTER CYLINDER
Needed tools: clamp pliers, 10#, 12# open
end wrenches, 13# sleeve and ratchet
wrench.
6.1 Disassembly sequence:
1) Pull out the plug of oil level sensor.
2) Use sucker to pump out the brake oil.
Note: Since the brake oil has strong
corrosiveness, you should prevent the brake
oil from splashing on your skin and lacquer
finish.
3) Use clamp pliers to dismount the
fastening clamp at the oil inlet pipe of
clutch cylinder, and remove the oil inlet
pipe of clutch.
4) Use 10# and 13# open end wrench to
loosen the brake pipeline of brake
master cylinder.
PDF created with pdfFactory Pro trial version www.pdffactory.com