Chery A21 2005, Service Manual, Page: 150 / 475

CHERY A520 SERVICE MANUAL CHASSIS
69
V. ASSEMBLY OF REAR AXLE AND SUSPENSION SYSTEM
ASSEMBLY SEQUENCE:
——
Use bolt 23 to connect the upper control arm 3 and trailing arm 2(one weld nut installed
on the rear trailing arm); The left and right sides are the same, and the fastening torque
is 90
～
100 m N
⋅
. Do not fasten the bolt at this time.
——
Use bolt 21 and nut 22 to connect the guide bar 20 and trailing arm 2. The left and right
sides are the same, and the fastening torque is 90
～
100 m N
⋅
.Don not fasten the bolt
and nut at this time.
——
Use bolt 19 and nut 18 to connect the rear lower control arm 17 and trailing arm2. The
left and right sides are the same, and the fastening torque is90
～
100 m N
⋅
. Do not
fasten the bolt and nut at this time.
——
Use nut 8(2 pieces) to connect the rear strut 9 and vehicle body. The left and right sides
are the same and the fastening torque is 50
±
10
m N
⋅
.
——
Use bolt 1 to connect the trailing arm and vehicle body ( the vehicle body has one weld
nut and include the well-connected upper and lower control arms and guide bar). The
1 Bolt
2 Trailing Arm
3 Upper Control Arm
5 Gasket
23 Bolt
8 Nut
9 Rear Sliding Pole
10 Bolt
11 Nut
12 Nut
14 Adjusting Bolt
17 Lower Control Arm
18 Nut
19 Bolt
20 Guide Bar
21 Bolt
22 Nut
13 Gasket
6 Gasket
7 Nut
15 Bolt
16 Adjusting Bolt
4 Nut
PDF created with pdfFactory Pro trial version www.pdffactory.com