Chery A21 2005, Service Manual, Page: 117 / 475

CHERY A520 SERVICE MANUAL CHASSIS
36
If the car height cannot meet the standard,
you should check whether there is damage or
deformation
on the front and rear
suspensions.
3. Check the wheel bearing clearance,
and replace front wheel bearings
when necessary.
4. Check the status of rims and tires.
5. Check the tightness degree of the
steering linkage and ball joint.
6. Park the car on the flat ground, and
carry no luggage or person.
7. Shake wheels to check the tightness of
front suspensions.
8. Check whether the vibration damper
can operate normally.
1) Check whether there is oil leakage;
2) Check whether there is wearing in the
assembly bushings;
3) Check the damping force of vibration
damper, and replace the vibration
damper if it disqualifies.
Note: The oil tank is semi-filled; the cooling
water in the water tank and the engine oil
reach up to the specified height, and the tire
jack and other tools are in specified positions.
II. RIM AND TIRE
1. Visual inspection
Inspect tire and rim.
During the inspection, if you find any crack,
damage, deformation and other problems on
the rim or tire, you should replace them
instantly. As the right figure illustrated:
Fig. Tire Wearing
PDF created with pdfFactory Pro trial version www.pdffactory.com