Chery A21 2005, Service Manual, Page: 116 / 475

CHERY A520 SERVICE MANUAL CHASSIS
35
CHAPTER III FOUR-WHEEL ALIGNMENT CHECK & ADJUSTMENT
SECTION I BASIC CHECK
ADJUSTMENT WORK PRIOR TO
CHECK
I. PREPARATION WORK PRIOR TO
ADJUSTMENT
1. Check tire pressure and adjust it to
specified pressure
Standard inflation pressure of cold tire (Kpa)
Item 195/55R15 Spare tire
Front wheel 230
Rear wheel 210
250
2. Check the height of vehicle body
First of all, you should inflate the tire
pressure to standard specified value before
measuring the height of vehicle body (the
pressures of the left and right tires should be
consistent with each other.)
①
Front measuring point
Measure the height from the ground to the
central point of the bolt connecting the lower
control arm assembly and the front steering
knuckle. The height of the vehicle body at the
left wheel side should be as basically same as
that of the vehicle body at the right wheel
side.
②
Rear measuring point
Check the height from the ground to the
central point of the bolt connecting the rear
axle and the vibration damper. The height of
the vehicle body at the left wheel side should
be as basically same as that of the vehicle
body at the right wheel side.
Note: Before checking the wheel alignment,
you should regulate the car to specified
height.
Front
Rear
PDF created with pdfFactory Pro trial version www.pdffactory.com