Chery A21 2005, Service Manual, Page: 70 / 475

Chery Service Manual for A520 Body Dimension and Accessories
8
③
Pull the piano wire along the bonding
agent to cut it off.
Tip: Do not let the piano wire spoil the two
stoppers.
④
Remove the glass, and then remove the
moulding of the rear window
The installing steps are reverse to those for
removal.
Figure 168
INSTALLING THE GLASS OF THE
REAR WINDOW
1. Fitting the rear window moulding
Place the moulding around the glass and fit it
manually.
Tip: Be sure to remove the glass of the rear
window first before fitting the moulding
Figure 169
2. Clean and finish the contact surface of
the body and cut off the rough parts on
the body;
Tip: Leave bonding agent as much as
possible on the body and clean the cut
surface of the bonding agent with a rag
soaked with washer fluid.
Tip: Even if the entire bonding agent has
been cleared, you should also clean the body.
Figure 170
Stopper
Bonding
agent
PDF created with pdfFactory Pro trial version www.pdffactory.com