CG Emotron VS Series, Quick Start Manual

Page: 132 / 180

Emotron VS Series Quick Start Guide
- 131 -
Group F1 Multi-Reference and Simple PLC Function
F1.00 Reference 0
Range:-100.0 ～ 100.0%
Default:0.0%
F1.01 Reference 1 Range:-100.0 ～ 100.0%
Default:0.0%
F1.02 Reference 2 Range:-100.0
～
100.0%
Default:0.0%
F1.03 Reference 3
Range:-100.0 ～ 100.0%
Default:0.0%
F1.04 Reference 4 Range:-100.0 ～ 100.0%
Default:0.0%
F1.05 Reference 5 Range:-100.0
～
100.0%
Default:0.0%
F1.06 Reference 6
Range:-100.0 ～ 100.0%
Default:0.0%
F1.07 Reference 7 Range:-100.0
～
100.0%
Default:0.0%
F1.08 Reference 8 Range:-100.0
～
100.0%
Default:0.0%
F1.09 Reference 9
Range:-100.0 ～ 100.0%
Default:0.0%
F1.10 Reference 10 Range:-100.0 ～ 100.0%
Default:0.0%
F1.11 Reference 11 Range:-100.0
～
100.0%
Default:0.0%
F1.12 Reference 12 Range:-100.0 ～ 100.0%
Default:0.0%
F1.13 Reference 13 Range:-100.0
～
100.0%
Default:0.0%
F1.14 Reference 14 Range:-100.0
～
100.0%
Default:0.0%
F1.15 Reference 15
Range:-100.0 ～ 100.0%
Default:0.0%
At most 16 steps of multi-reference can be set by different status combinations of " multi-feference
terminals 1
～
4" of digital input.
Multi-reference can be the setting source of frequency, V/F separated voltage and process PID.
The multi-reference is relative value and ranges from -100.0% to 100.0%.
As frequency source, it is a percentage relative to the maximum frequency. As V/F separated
voltage source, it is a percentage relative to the rated motor voltage. As process PID setting source, it
does not require conversion.
Multi-reference can be switched over based on different states of DI terminals. For details, see the
descriptions of group F4.
F1.16 Reference 0 source Range:0 ～ 6 Default: 0
0: Digital setting
（
F1.00)
1: keypad potentiometer (When using LED keypad)
2: AI1
3: Process PID output
4: X7/HI pulse input
5: AI2
6: AI3 (VSX Only)
It determines the setting channel of reference 0. You can perform convenient switchover between
the setting channels. When multi-reference or simple PLC is used as frequency source, the switchover
between two frequency sources can be realized easily.