Installation Guide for FibeAir IP-20C-HP
Page 53 of 204
Ceragon Proprietary and Confidential
9 Screw the gland into the radio unit
Important Note!
Before tightening the gland, make sure the gland is even with
the cover. Tighten the gland gently and make sure there is no
resistance. If there is resistance, stop immediately and verify that the
gland is not being inserted at an angle. Tightening the gland at an
angle can ruin the thread on the gland and prevent proper sealing of
the interface.
10 Tighten the gland cap.
11 Secure the cable to the gland with a tie wrap.
