Installation Guide for FibeAir IP-20C-HP
Page 171 of 204
Ceragon Proprietary and Confidential
Procedure
1 Assemble the OCU Mounting Kit. See Section 7.1.1,
2 Assemble three OCUs, two using a Left Rail Configuration and one using a
Right Rail Configuration. Attach an IP-20C-HP radio to each OCU, and connect
the radio-OCU assemblies to the Branching Pole Profile as shown in the
following figure. See Section 7.1.2,
Left
Left
Right
3 On the side of the OCU facing the pole:
◦
Attach Short U-Bends between the radio ports of the two OCUs. See
Section 7.1.3,
◦
Attach a Termination to the upper radio port of the OCU on the right. See
Section 7.1.5,
