Installation Guide for FibeAir IP-20C-HP
Page 23 of 204
Ceragon Proprietary and Confidential
2.4.2
Marketing Models for Diplexer Unit
This section explains how to read marketing models for the IP-20C-HP diplexer
unit. Constructing a marketing model for the purpose of equipment order should
always be done using a configurator.
Marketing models for IP-20C-HP diplexer units are constructed using one of the
following formats:
•
DXDHff-xxxy-ccWdd-t
(one diplexer in a single unit)
•
DXDHff-xxxY-ccWdd-eeWgg-t
(two diplexers in a single unit)
defines the radio unit marketing model placeholders.
provides examples of actual IP-20C-HP radio unit marketing models.
Table 3: IP-20C-HP Diplexer Unit Marketing Model Placeholders
Placeholder in
Marketing Model
Description
Possible Values
ff
Frequency band
6L,6H,7,8,10,11
xxxY
TX-RX separation and
block indication(Ceragon
internal)
xxx - TRS 3 figures in [MHz].
Y - Letter to indicate frequency block.
Example: 266A
The frequency block is a Ceragon internal
parameter which defines different channelization
using the same TRS and frequency band.
ccc
Channel indication or
LOW/HIGH or blank
{Start ch}W{End ch}
Example: 10W15
t
TX low / TX high
indication
L
–
TX Low
H
–
TX high
The following are some examples of specific diplexer unit marketing models based on the syntax
specified above.
Table 4: Diplexer Unit Marketing Model Examples
Marketing Model Example
Explanation
DXDH11-500-1W6-L
IP20-C-HP, Diplexer Unit,11,500-1W6-L
DXDH11-500-6W12-H
IP20-C-HP, Diplexer Unit,11,500-6W12-H
