1.3
Back Panel Descriptions
What to plug-in and where for each model.
1.3.1 The TalkSwitch 24
Jacks/Ports
What to plug in
MUSIC
Plug in a radio, CD player, PC soundcard or any other
device that emits an audio signal if you wish to use
TalkSwitch's Music-on-Hold feature. This is a 1/8"
(3.5 mm) phono jack. Mono cables are recommended.
PA
Connect to a P.A. system if you wish to use the external
paging feature. This is a 1/8" (3.5 mm) phono jack.
Mono cables are recommended.
E1, E2, E3, E4
Plug in any analog device that uses a standard (RJ-11)
telephone jack, such as: telephones, answering
machines, fax machines, internal or external PC
modems. Once these devices are plugged in, TalkSwitch
will recognize them as Ext. 111, Ext. 112, Ext. 113, or
Ext. 114.
L1/L2, L2
This is where you plug in your telephone lines (RJ-11).
If you have 2 lines out of 1 phone jack, you can plug
into the L1/L2 jack.
USB
Use the USB port if your PC supports USB connectivity.
If you use the USB port, you cannot use the serial port
simultaneously.
SERIAL
Attach the supplied serial cable (RS232) that connects
TalkSwitch to your PC. If you use the serial port you
cannot use the USB port simultaneously.
POWER
Plug the supplied AC Power Adapter in here.
3
1.0
Installing Talkswitch
