By default, TalkSwitch is set to Serial connection. To activate USB connection, dial
91
from an extension. To return to Serial connection, dial
90
.
The ‘PF’ box in between E4 and L1/L2 represents power failure support. In the event
of a power failure or loss of power to the TalkSwitch, Extension 4 will be able to receive
calls and make calls on Line 1.
1.3.2
The TalkSwitch 48LS
Jacks/Ports
What to plug in
MUSIC
Plug in a radio, CD player, PC soundcard or any other
device that emits an audio signal if you wish to use
TalkSwitch's Music-on-Hold feature. This is a 1/8" (3.5
mm) phono jack. Mono cables are recommended.
PA
Connect to a P.A. system if you wish to use the external
paging feature. This is a 1/8" (3.5 mm) phono jack.
Mono cables are recommended.
LAN PORT
You can connect to an Ethernet hub using a Category 5
cable with RJ-45 connectors. For future use.
E1 - E8
Plug in any analog device that uses a standard (RJ-11)
telephone jack, such as: telephones, answering
machines, fax machines, internal or external PC
modems, etc. Once these devices are plugged in,
TalkSwitch will recognize them as Extensions 111 to
118.
L1/L2, L2, L3/L4, L4
This is where you plug in your telephone lines (RJ-11).
If you have 2 lines out of 1 phone jack, you can plug
into the 1/2 and 3/4 jacks.
4
Talkswitch User Manual
LAN
MEMORY SLOT
USB
SERIAL
POWER
MUSIC
1/L2
L2
PA
E1
E2
E3
PF
L3/L4
L4
E5
E6
E7
E8
