CC Systems CC Pilot XS All-Integrated, User Manual And Reference Handbook

Page: 18 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
18
Misc Port (COM1) Alternatively: Audio, Communication and or Digital Input
(MISC)
Marking: X5 MISC
Connector Type: DIN M12, 8-pole, A-coded, male.
NOTE! This connector has two alternative functions depending on the configuration
ordered. The connector can be either as an communication (COM) port or as a
combination port with Audio, Digital Input and communication (COM) port.
The configuration is factory set and can not be changed.
COM port
When configured as a serial com port the signal “Ring Indicator” has been omitted,
which means that peripherals which require this signal will not work. The rest of the
COM port follows the RS232 standard, so peripherals which follow this standard can be
connected. The supported communication speed for these ports is 2.4 to 115.2 kbps.
COM
Pin Signal Description
1 DCD Data Carrier Detect
2 RxD Receive data
3 TxD Transmit data
4 DTR Data Terminal Ready
5 GND Signal reference
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
COM, Audio and Digital in
When X5 is configured as a combination of COM, audio and digital in the port will have
a limited COM port with only send and receive data signals. The port will also include
two channel audio out, microphone in and two channel digital in.
Audio & Digital Input
Pin Signal Description
1 Audio Out L Left channel audio out
2 Audio Out R Right channel audio out
3 TxD Transmit data
4 Microphone Microphone audio in
5 GND
6 Digital Input (0-36 VDC)
1)
7 Digital Input (0-36 VDC)
1)
8 RxD Receive data