User Manual and Reference Handbook for the CC Pilot™ XS
11
Don’t use sharp or pointed objects on the touch screen since these can damage or
scratch it, which can seriously degrade its functionality
.
Reset of the unit
Using the On/Off button in combination with the brightness buttons it is possible
perform three modes of advanced start ups, forcing registry clean and formatting of
Compact Flash.
Make sure to back up any critical data before performing the steps below.
Clear the registry
1.
Turn off the unit
2.
Press the Power On button
3.
Press the backlight increase key for about 2 seconds and the LED turns red
4.
Press the backlight decrease key once
5.
The LED starts to blink with a rate of 1Hz
6.
Wait until the unit has finished its booting sequence
7.
The registry is now restored
Format the Compact Flash (Hard Disk) storage memory
To format the Compact Flash perform the step 3 and 4 described in cleaning the
registry 2 times, i.e. press increase, decrease, increase and decrease keys. The disk
will get the format FAT32 and TFAT.
Summary of Contents for CC Pilot XS All-Integrated
Page 23: ...User Manual and Reference Handbook for the CC Pilot XS 23 Display Panel Dimensions for 10 4...
Page 24: ...User Manual and Reference Handbook for the CC Pilot XS 24 Display Panel Dimensions for 6 5...
Page 48: ...User Manual and Reference Handbook for the CC Pilot XS 48...
Page 50: ...User Manual and Reference Handbook for the CC Pilot XS 50...
