CC Systems CC Pilot XS All-Integrated, User Manual And Reference Handbook

Page: 4 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
4
CC Pilot™ XS
Introduction
In this user manual and reference handbook you, as a user, a reseller or system
integrator, will find important information about the CC Pilot™ XS. The handbook will
guide you and broaden your knowledge about this onboard computer’s technical
possibilities and advantages. Described herein are the CC Pilot™ XS Basic, CC Pilot™
XS Extended and CC Pilot™ XS All-Integrated versions.
This material is copyright protected © 2005 CC Systems AB. All rights reserved.
Identification
There is a brand label on the back of the CC Pilot™ XS. On the brand label there are
numbers which identify your unique computer. During service and other contact with
the supplier it is important to be able to provide these numbers.
Care
During welding or other service, on the vehicle or machine where the CC
Pilot
™
XS is installed, which can damage your CC Pilot
™
XS, all cables shall
be disconnected from you computer before such work begins.
The CC Pilot™ XS shall only be mounted and serviced by authorised
personnel. If the unit is opened by unauthorised personnel, the normal
guarantee will cease to be valid.
Scratches, or in the worst case damages, to the display occur easily if it comes
in contact with a sharp edge or hard material. In order to increase the longevity
of the screen, this is naturally something which should be avoided.
The unit can be damaged if it becomes too hot. Therefore, do not cover the unit
by laying things on it, like for example, hanging a jacket or other clothes on it.
For more information, see the chapter entitled Installation.
Brand Label