CC Systems CC Pilot XS All-Integrated, User Manual And Reference Handbook

Page: 41 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
41
Chose the internal GSM/GPRS modem on COM3.
Depending on the connection, an extra AT-command may be needed..
This is done under Configure. Chose the tab Call Options in the dialogue
which opens and type in the AT-command under Extra Settings.
The contents of the AT-command vary depending on modem type and cellular network
provider. In the CC Pilot™ XS there is a Siemens AC45 modem. Contact your cellular
network provider for information on issuing the right AT-command.
Press Next .
Type in the telephone number which you would like to call and press
Finish .
Establish a connection
The connection that was created above can now be found under Network and Dial-up
Connections . To establish a link, open the connection, after which a username and
password may need to be given. Then press Connect to place the call.
Note that to place a call with the modem, the SIM card must have been configured so
that no PIN code is needed.