User Manual and Reference Handbook for the CC Pilot™ XS
33
CAN
From the CAN tab, settings are made for CAN message frame mode and baud rate. By
pressing the default button the CAN settings will be reset to predefined default settings.
GPS
From the GPS tab, status can be read for the GPS and the baud rate of the GPS can
be altered.
To be able to get any information from the GPS it must be connected. Make sure all
other programs that use the GPS are closed then click Connect to establish a
connection. The connection procedure can take up to several minutes.
When connected the Info panel will give following information
:
Software information
of current software version in the GPS receiver.
NMEA message count
this counter increases with one each times the
GPS sends out a message with information.
Number of satellites
is the number of satellites the GPS receives signals
from. This value is only valid if the NMEA message counter is counting.
Change baud rate by selecting the desired baud rate and click apply. Note
that the baud rate change will reset to default rate when the unit is
restarted.
Summary of Contents for CC Pilot XS All-Integrated
Page 23: ...User Manual and Reference Handbook for the CC Pilot XS 23 Display Panel Dimensions for 10 4...
Page 24: ...User Manual and Reference Handbook for the CC Pilot XS 24 Display Panel Dimensions for 6 5...
Page 48: ...User Manual and Reference Handbook for the CC Pilot XS 48...
Page 50: ...User Manual and Reference Handbook for the CC Pilot XS 50...
