CC Systems CC Pilot XS All-Integrated, User Manual And Reference Handbook

Page: 40 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
40
Program installation
Different Windows CE programs have different requirements on how they shall be
installed. The most common is either that they are installed directly on the CC Pilot™
XS or via Microsoft ActiveSync. Consult the instructions for the program you are
installing to learn exactly how the program is installed.
Connect to the GPS receiver
The connection to the internal GPS receiver operates in the same way as with an
external GPS, which connects on the external COM port. The internal GPS receiver is
connected to an internal COM port, COM 2. The default setting for the baud rate is
4800 baud and position information is sent according to the NMEA standard.
In order to get a signal from the GPS receiver, an antenna must also be connected. For
more information regarding antenna connection please se the Installation chapter.
Occasionally, depending on the time of day and visibility against the sky, there can be
problems with the signal reception from GPS satellites and the receiver then needs
time to position it self. One may therefore need to wait several minutes before position
information can be obtained.
The GPS receiver in itself gives only position information. So, a GIS software is still
needed which interprets the signal, such as a map program.
Creating a dial-up connection with the GSM/GPRS modem
To create a remote connection via the internal GSM/GPRS modem, an antenna must
be mounted to the GSM/GPRS connection on the CC Pilot™ XS. Besides that, a SIM-
Card must be installed. See the Installation chapter for information on the SIM card and
antenna.
Setting up the connection
The Windows CE settings for creating a dial-up connection are found under network
connections. Network Connections is opened by pressing the
Start button, choosing
Settings and then Network and Dial-up Connections .
Open Make New Connection and give a name for the connection in the
dialogue which opens. Press Next .