CC Systems CC Pilot XS All-Integrated, User Manual And Reference Handbook

Page: 15 / 57

User Manual and Reference Handbook for the CC Pilot™ XS
15
CC Pilot™ XS
Connectors
Connectors
Accessible on the rear and top of CC Pilot™ XS, there are a number of ports to
connect various peripheral equipment. In order to give the CC Pilot™ XS its high
environmental classification, the unit is equipped with DIN M12 connectors. CC
Systems AB provides adapters which convert from DIN M12 to standard connectors.
Use caution when plugging/unplugging connectors. If the pins become bent or
damaged they may not function correctly, or in the worst case, the onboard computer
or other equipment may be damaged.
The connector legend describes where the connectors are located on your unit. On the
top of the unit there are also connectors for the GPS antenna and GSM/GPRS modem.
The connectors available is dependent on the unit’s configuration, it can therefore
address connections which may not be available to your unit
The table below describes the connectors on the CC Pilot™ XS.
Position Description
X1 Power Supply
X2 Ethernet1
X3 Ethernet2
X4 Video
X5 MISC (COM, Audio and/or Digital In
X6 CAN1
X7 CAN2
X8 USB1
X9 USB2
Notice that the following connector descriptions are those which are located on the unit,
not those that the attached cables shall have in order to mate with them.