Case 570NXT, Operator'S Manual, Page: 71 / 280

3 - CONTROLS/INSTRUMENTS
Console controls
Hand throttle (if equipped):
Turn the dial clockwise to increase engine speed. Turn
counter-clockwise to decrease engine speed. When the
foot throttle is used and released, the engine will default
to the speed at which the hand throttle control is set.
NOTE: If the brake enabled idle feature is active, the hand
throttle is disallowed when either brake pedal is pressed.
Return the hand throttle dial to the idle position to restore
(recapture) the hand throttle.
RAPH12UTL0021AA
1
Differential lock:
The differential lock button engages or
disengages the differential lock. To engage
the differential lock, ensure that neither rear
wheel is spinning freely and press and hold
the button. Release the button to disengage
the differential lock.
NOTICE: Do not use brake steering with the differential
lock engaged.
RAPH12UTL0021AA
2
Key switch
The key switch has four positions.
• ACC - Turn the key counter-clockwise from the OFF
position to ACC, to give power to the accessories.
• OFF - To shut down the engine, turn the key to the OFF
position. After the engine has stopped, remove the key.
• ON - Turn the key clockwise to the ON position. There
will be a momentary delay as the system powers up.
For example, allow two or three seconds with the key
switch at ON before cranking the engine on machines
with the advanced instrument cluster.
• START - Turn the key completely clockwise to the
START position to actuate the starter motor. After
the engine starts, release the key. The key will return
automatically to the ON position.
RAPH12UTL0089AA
3
3-11