Case 570NXT, Operator'S Manual, Page: 144 / 280

7 - MAINTENANCE
General safety before you service
Unless otherwise instructed, always perform these steps before you service the machine:
1. Park the machine on a flat, level surface.
2. Place the loader bucket on the ground, with the bottom of the loader bucket parallel to the surface, unless you
need to open the hood to perform service, then raise the loader arms and install the support strut.
3. Place the direction control lever and the transmission in neutral.
4. Shut down the engine.
5. Place a 'Do Not Operate' tag on the key switch so that it is visible to other workers or remove the key.
Hour meter
The engine hour meter displays the amount of actual
hours the engine has run. Use the engine hour meter
along with the Maintenance Chart in this manual to ser-
vice your machine at the correct time periods.
NOTE: You may check the engine hours without the igni-
tion key. Press either of the menu selection switches and
the current engine hours will appear in the display for 10
seconds.
RCPH10TLB139AAF
1
7-2