Case 570NXT, Operator'S Manual, Page: 33 / 280

2 - SAFETY INFORMATION
Safety rules - Mounting and dismounting
• Face the machine when mounting and dismounting.
• Mount and dismount the machine only at designated
locations that have hand holds, steps, or ladders.
• Maintain a three-point contact with steps, ladders, and
hand holds.
• Do not jump off the machine.
• Never mount or dismount from a moving machine.
• Do not use the steering wheel or other controls or ac-
cessories as hand holds when entering or exiting the
cab or operator's platform.
• Make sure steps, ladders, and platforms remain clean
and clear of debris and foreign substances. Injury may
result from slippery surfaces.
Safety rules - Operator precautions
• Continuous long term contact with hydraulic fluid may
cause skin cancer. Avoid long term contact and wash
the skin promptly with soap and water.
• Know and understand the job site traffic flow patterns
and obey signalmen, road signs, and flagmen.
• Know and use the hand signals required for particular
jobs, and know who has the responsibility for signaling.
Refer to page
2-34 .
• Know and understand that job site conditions may
change on an hourly basis. Hills of dirt, debris, or
obstructions may grow and change from the time you
began the day. It is your responsibility to monitor the
changes and keep the machine, tools, and attach-
ments/implements, etc. a safe distance.
• Keep clear of moving parts. Loose clothing, jewelry,
watches, long hair, and other loose or hanging items
can become entangled in moving parts.
• Wear protective equipment when appropriate. Hard
hats, protective glasses, protective shoes, gloves, re-
flector type vests, respirators, and ear protection are
examples of equipment that may be required.
• Walk around the work area before you start and look for
hazards. Note and avoid all hazards and obstructions
such as ditches, underground lines, trees, cliffs, over-
head electrical wires, or areas where there is danger of
a slide.
• Do not operate the machine if you do not feel well. This
can be dangerous for you and for the people around
you.
• Do not operate the machine while under the influence
of alcohol, drugs, or while otherwise impaired.
• OSHA requirements make it the employer’s respon-
sibility to fully instruct each operator in the proper
and safe operation of all operative equipment. Both
employer and employee should thoroughly familiar-
ize themselves with this manual and the AEM safety
booklet.
2-9