Case 570NXT, Operator'S Manual, Page: 225 / 280

7 - MAINTENANCE
6. After all the fluid has drained from the system, in-
spect the transmission oil suction filter.
A. Remove two cap screws.
B. Remove the plate and pull out the suction filter.
C. Inspect the filter for any type of debris.
NOTICE: If suction filter contains debris, contact your au-
thorized dealer before continuing with this procedure.
RCPH09TLB004AAF
4
7. Insert the suction filter, secure in place with plate and
bolts. Torque bolts to
23 N·m ( 17 lb ft ).
8. Lubricate the new transmission filter gasket with
clean oil.
NOTICE: Never use a filter removal tool to install the filter.
9. Install the new filter and turn clockwise until the gas-
ket contacts the head of the filter assembly.
10. Continue to tighten the filter another 1/3 turn.
11. Install the transmission drain plug.
12. Fill the system to specification.
13. Install the transmission dipstick.
14. Start up the engine.
15. Check for leaks around the filter.
16. Operate the machine in 1st and 2nd gear for several
minutes.
17. Park the machine on a level surface and, with the
engine running, check the fluid level.
18. Shut down the engine.
19. Add fluid as needed.
7-83