background image

2

AquaSnap

®

 chillers make 

noise in the marketplace, not 
the workplace.

The AquaSnap chiller’s low-sound 
AeroAcoustic™ fan produces up to half 
the sound level of propeller fans. Much 
of the noise reduction is in frequencies 
where noise is most annoying, which 
makes AquaSnap chillers ideal for 
sound-sensitive environments. When 
lower ambient temperatures allow 
part-load operation or during sched-
uled nighttime operation, the units op-
erate with fewer fans and become even 
quieter. AquaSnap chillers are quiet 
during the day and even quieter at 
night.

The savings will continue to 
mount

Besides costing less to buy and install, 
AquaSnap chillers are also more af-
fordable to operate. Carrier’s Aqua
Series chillers are our most efficient 
air-cooled models. The AquaSnap 
chiller provides full load EER (Energy 
Efficiency Ratio) up to 10.5 and IPLV 
(integrated part load value) up to 15.9. 
AquaSnap chillers use ultra-quiet, high-
efficiency rotary scroll compressors, 
operated in single (sizes 010 and 015) 
tandem (sizes 018 to 060), and tan-
dem or trio (sizes 070 to 090) per in-
dependent circuit for greater efficiency 
at partial loads.

Electronic expansion valve (EXV) 

allows for precise control through all 
operating ranges, resulting in higher 
efficiency and improved reliability.

Proven reliability that’s built in

Thousands of AquaSnap chillers are
already in service around the world. 
This field-proven design is backed by a
12-month warranty that includes the 
hydronic system. The compressors are 
maintenance-free and protected by an 
auto-adaptive control that minimizes 
compressor wear. Unit sizes 035 and 
up have two independent refrigerant 
circuits. Year-round operation is
standard, from –20 F (–29 C) (with
optional cooler heater, low ambient 
control, and wind baffles) to 120 F
(50 C).

Rotary scroll compressors

 provide 

smooth, quiet and reliable operation.

All-in-one package

AquaSnap chillers provide the most 
comprehensive chilled water circuit 
available for any air-cooled chiller.
Included is a brazed plate direct
expansion cooler that may be remote-
mounted. The cooler is also completely 
drainable with factory-installed vents 
and drains.

Electronic thermal-dispersion 
flow switch

 is included with the cool-

er. The switch is factory installed and 
tested and contains no moving parts 
for high reliability.

Optional integrated hydronics 
package

 is more than just a pump, it 

is an entire chilled water system,
including:
• Single/dual pumps up to 15 hp 

and 160 ft head

• Regular strainer
• Cleanout  strainer
• Flow regulator

• Freeze protection to –20 F (–29 C) 

(with freeze protection option)

• Heaters
• Required piping
• Pressure/temperature taps
• Isolation valves for dual pump 

systems

• VFD available on sizes 070 to 090, 

and VFD compatibility on all models 

The factory-installed and tested hy-

dronics package provides faster, sim-
pler and less expensive installation.

Digital scroll compressors

 are 

available as a factory-installed option. 
These allow for incremental unloading 
with capacity modulation to better 
match building load when compared to 
standard scroll compressors.

Environmentally sound

Carrier’s Puron

®

 refrigerant (R-410A) 

enables you to make a responsible de-
cision in the protection of the earth’s 
ozone layer. Puron refrigerant is an 
HFC refrigerant that does not contain 
chlorine that is damaging to the ozone 
layer. Puron refrigerant is unaffected 
by the Montreal Protocol. Puron refrig-
erant is a safe, non-toxic*, efficient and 
environmentally sound refrigerant for 
the future.

Durable construction

The 30RAP chillers have a structurally 
sound base that can be point-loaded, 
therefore, no perimeter base rail is re-
quired. All 30RAP units have weather-
ized cabinets constructed of heavy-duty 
galvanized steel with exterior panels 
painted with corrosion-resistant baked 
enamel. Inside and outside surfaces are 
protected to ensure long life and good 
appearance. The durable, galvanized 
steel, painted components exceed the 
requirements of the 500-hour salt 
spray test per ASTM (American Soci-
ety for Testing and Materials) B117.

Comfort

Link

TM

 controls speak 

your language

The 

Comfort

Link controls communi-

cate in plain English, making it as easy 
as possible to monitor and control 
each AquaSnap chiller while accurately 
maintaining fluid temperatures. The 
large scrolling marquee display acts as 
a window into the unit’s operation, 
providing easy-to-read information 
about chiller performance and over
15 diagnostic functions. Carrier 30 
Series chillers’ 

Comfort

Link controls 

provide features such as chilled water 

Features/Benefits (cont)

Table of contents

Page

Features/Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-3
Model Number Nomenclature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AHRI Capacity Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-8
Options and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9,10
Base Unit Dimensions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11-14
Accessory Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15-17
Selection Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Performance Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19-40
Typical Piping and Wiring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  41-44
Electrical Data  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  45-56
Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  57-59
Typical Control Wiring Schematic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Application Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  61-68
Guide Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69-74

Summary of Contents for Aquasnap 30RAP010













































































Reviews: