Carrier Aquasnap 30RAP010, Product Data

Page: 11 / 76

11
a30-
40.50 [1028.7]
FIELD POWER ENTRY SEE NOTE #2
7/8
22.4[]
24.85 631.2[]
4.61 117.1[]
SEE NOTE #3
TYP.
1.00
25.4[]
SEE NOTE #3 TYP. 1.00
25.4[]
9.68
245.9[]
15.43
391.9[]
9.52 241.8[]
48 [1219] MIN.
36 [914] MIN.
42 [1067] MIN.
36 [914] MIN.
66.50 [1689.1]
RADIUS
20 [508]
CONTROL BOX
HINGED ACCESS
1.50
38.1[]
1.50
38.1[]
Y
X
H
SEE NOTE #5
UNIT
CENTER OF GRAVITY
UNIT HEIGHT
VICTAULIC CONNECTIONS
X
Y
H (STANDARD)
H (VALUE SOUND)
WATER IN/OUT
STANDARD
30RA010
18.40 [467]
37.80 [960]
66.5 [1689]
61.0 [1549]
2"
30RA015
18.35 [466]
37.69 [957]
66.5 [1689]
61.0 [1549]
2"
RIGHT SIDE
VIEW
CONTROL BOX HINGED ACCESS
NOTES: 1. DO NOT CAP OR OTHERWISE OBSTRUCT THE LIQUID LINE TEMPERATURE RELIEF. 2.
7/8 [22.4] PILOT HOLE PROVIDED FOR LOCATING FIELD POWER WIRING.
ACTUAL HOLE REQUIRED DEPENDS ON FIELD WIRE SIZING. 3.
0.437 [11.10] HOLE USED FOR MOUNTING UNIT.
4. UNIT MUST HAVE CLEARANCES AS FOLLOWS: TOP - DO NOT RESTRICT. COIL SIDE - 42 [1067] FROM SOLID SURFACE. PANEL SIDE - 48 [1219] PER NEC. 5. SEE TABLE COLUMN H; DIMENSION FOR STANDARD FAN OR VALUE SOUND FAN OPTION. 6. CARRIER DOES NOT RECOMMEND INSTALLATION IN A PIT. 7. UNIT CAN BE HANDLED USING THE FORK TRUCK LIFT POCKETS. 8. WATER CONNECTIONS RECESSED 2-3/8 INCHES INSIDE UNIT.
DIMENSIONS IN [ ] ARE IN MILLIMETERS
COMPRESSOR
ACCESS
COIL AREA
AIR FLOW
AIR FLOW
FRONT VIEW
PANEL SIDE SEE NOTE #4
COIL SIDE SEE NOTE #4
SERVICE ACCESS
SERVICE CLEARANCE BORDER (NOT TO SCALE)
TOP VIEW
CG
VALUE SOUND FAN OPTION
(PICTORIALLY)
FIELD CONTROL WIRING CONNECTIONS
WATER-IN
WATER-OUT
FORK TRUCK POCKETS
9. DIMENSIONS ARE IN INCHES.
Base unit dimensions — 30RAP010,015