Carrier Access Adit 600, User Manual

Page: 268 / 296

C-2 CMG Router - Release 2.7
Troubleshooting
Communication Related Issues
Communication Related Issues
Excessive Triggered Update Events on the Events screen
This generally is an indication that the network is changing due to the addition or
deletion of hardware. Once the information has been exchanged, these events should
subside. If this continues, it may indicate that the number of networks or servers on the
LAN exceed the Router’s table capacity. Set the LAN NETWORK UPDATES field,
located on the
Local Profile window to <Send> or <Neither> and then statically
configure the appropriate networks.
Excessive triggered update events may also be the result of information advertised to
the Router by a Remote Unit. If this is the case, restrict advertising on the remote unit
see,
Chapter 5, Profile Directory:Remote Profile .
LAN Related Issues
Unable to add data filters, advertise networks or create
static route entries
The Router software will accommodate a maximum of 150 filters. Data filters, such as
address, custom or protocol filters, networks advertised to no remotes, firewall filter
rules and all static route entries are all considered filters. If you have been able to add
filters in the past, but are no longer able to do so, this is an indication that the maximum
limit has been reached. We suggest that you review all created data filters, advertised
networks and static route entries and eliminate those that are no longer applicable. See
Chapter 4, LAN (Local) Profile Setup .