Carrier Access Adit 600, User Manual

Page: 104 / 296

4-18 CMG Router - Release 2.7
Profile Directory:Local Profile
Filters
Filters
Use this screen to review currently enabled data filters or to enable new filters. Data
filters are used to determine whether data can be sent or received on the LAN/WAN
based on a specific device, protocol type or defined data string. Data filters must be
defined using the Custom, Protocol and Address Filter screens prior to being enabled
on the current screen.
Filters will not be in effect until they are added to this screen.
Once enabled, they will adhere to the value set in the Forward Mode field.
To Define and Enable Filters:
1. Select Define Filter: <Custom > - >
2. Scroll with [S
PACEBAR
] to select Filter type (Custom, Protocol, Address).
3. Select [C
TRL
A] to add a new Filter.
4. Complete required fields for Filter, see the below for more information in the
specific Filter Fields:
Custom Filter, see
Defining Custom Filters on page 4-22
Protocol Filter, see Defining Protocol Filters on page 4-23
Address Filter, see Defining Address Filters on page 4-24
5. Select [E
SC
] to return to the Main Filters window.
6. Select [C
TRL
A] to Enable this filter
7. Select Filter type, scroll with the [S
PACEBAR
] to select.
8. Select [E
NTER
] to enable the Filter. Note: the Filter will appear on the list of
Enabled Filters.