Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 07/18
15
CERTUS Installation Manual
USB Input
The Certus master CMM includes a USB 2.0
connector for connection to a Personal Computer
where the
CCS
(Certus Configuration Software)
configuration SW resides.
A USB cable of the correct size is available as an
accessory
(CSU)
.
Certus Configuration Memory (CMC)
A backup memory, called CMC (optional)
can be installed in the Certus master CMM
and used to save the SW configuration
parameters.
The CMC is written each time a new project
is sent from the PC to the CMM.
⇒
Always switch the CMM off before
logging on to/logging off from the CMC.
Insert the card in the slot in the rear panel of
the CMM (in the direction shown in Figure 3
- CMC).
MULTIPLE LOAD function
To perform the configuration of several CMM modules without using a PC and the USB
connector, you can save the desired configuration on a single CMC and then use it to download
data on the modules CMM to be configured.
If the file contained in the CMC is not identical to the one contained in CMM, an
overwrite operation that will permanently delete the configuration data contained in
CMM will be performed.
WARNING: ALL DATA PREVIOUSLY CONTAINED IN CMM WILL BE LOST.
RESTORE function
If the CMM unit is damaged, you can replace it with a new one; having already saved all the
configurations on the CMC, all you need to do is insert the CMC in the new CMM and switch
on the Certus system, that will immediately load the backup configuration. In this way, the
work interruptions will be minimized.
Technical Data Label
CMC Label
