106
Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 07/18
Delay
DELAY operator applies a delay to a signal
by setting the output to 1 (TRUE) after the
set time, against a change in the level of the
input signal.
Time: The delay can be set to between 10 ms
and 1093.3 s.
Rising edge: If selected, the delay starts on
the input signal’s rising edge at the end of which the output changes to 1 (TRUE) if the input
is 1 (TRUE) where it remains for as long as the input stays at 1 (TRUE).
Parameters
If not selected the logic is inverted, the output is set to 1 (TRUE) on the input signal’s rising
edge, the delay starts on the input signal’s falling edge, at the end of the set time the output
changes to 0 (FALSE) if the input is 0 (FALSE) otherwise it remains 1 TRUE.
Retriggerable: If selected the time is reset each time the input status changes.
CERTUS Installation Manual
