Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 07/18
105
Passing Make Contact
In the PASSING MAKE CONTACT operator
the output follows the signal on the input.
However, if this is 1 (TRUE) for longer than
the set time, the output changes to 0 (FALSE).
When there is an input falling edge, the timer
is cleared.
Parameters
Time: The delay can be set to between 10 ms and 1093.3 s.
Retriggerable: If selected the time is not reset when there is an input falling edge. The output
stays 1 (TRUE) for all the selected time. When there is a new input rising edge, the timer
restart again.
CERTUS Installation Manual
