Car-O-Liner Group AB
Quick 42
88
40724, EN- rev. 8, 2017-09
7.6 Emergency lowering of the lift, later design of SDV 1 valve
1
Cut off power to the bench.
2
Place safety supports in front and rear of the bench between floor
and bench, eg. pallets or jackstands.
If lowering of the scissors lift does not work, remove measuring
bridge (if any) and the lid of the hydraulic unit.
3
Remove the lid of the electric box and check the fuse, 2.5 A glass
fuse.
4
Remove all items around and under the bench. If the vehicle can
be moved on its own wheels, lock the brakes or secure the wheels
to prevent the vehicle from moving.
5
Loosen the plastic nut and remove the coil on the rear valve
(SDV 1) on left –side (earlier design of SDV 1, see section 7.5).
2
3
5
