Quick 42
Car-O-Liner Group AB
40724, EN - rev. 8, 2017-09
43
3.7.1 Transport
Protection
All models of Quick 42 are equipped with transport protection that holds the
base frame against the bottom of the bench.
IMPORTANT!
Remove transport protection before the lift is put in use;
otherwise damage can occur.
IMPORTANT!
Transport protection must be used whenever the equipment
is moved.
3.7.2
Mains Connections Check
Ensure that the electric motor is supplied with the correct voltage and fre-
quency and that it turns in the right direction after connection. For connec-
tion information.
See section 3.3.3 “Power unit”.
3.8 Space
requirements
The recommended space for installation is shown in the illustration on next
page.
Early units must be bolted to a flat, good quality concrete floor. From MFG
no 2240 the units can be used either as a mobile unit or bolted to the floor.
See section 3.7.1 "Anchoring to the floor” and chapter 5 “Mobile unit”.
NOTE
! The recommendation is to bolt the unit to the floor. In mobile use
exercise care when driving on to the run up ramps and also when to stop
(braking) on the bench. Risk for sliding of the bench.
