Quick 42
Car-O-Liner Group AB
40724, EN - rev. 8, 2017-09
81
6.3 Draw
aligner
inspection and service plan
The draw aligner and its component parts are subject to large amounts of
loading and strain and therefore need regular inspection and replacement of
any worn parts.
For the hydraulic components, please see the manufacturer’s instructions.
Daily inspection
Monthly
Check piston rod for damages and oil leakage.
Contact Service & Support if leaking.
Check that all locking pins at at the cylinder attachment
points and draw aligner are undamaged and that locking
washers are in place and undamaged. Replace if
necessary.
Check hose couplings for damages and leakage.
Replace if necessary.
Check that locking pegs are undamaged and can be
completely pressed into the holes.
Replace pegs and/or clean holes if necessary.
Check locking wedge for damage or deformation.
Replace if necessary.
Check pulling chain and pulling clamps for damage or
deformation.
Replace if necessary.
Check that the cylinder attachment points are greased
and do not jam.
Lubricate if necessary.
