Car-O-Liner Group AB
Quick 42
14
40724, EN- rev. 8, 2017-09
WARNING!
Observe high standards of cleanliness when working with the
hydraulic system. Dirt in the hydraulic oil can cause operating problems.
WARNING
! Never drive the car onto the bench with the lift in raised
position. Risk for vehicle overturning which may cause injuires.
WARNING
! The vehicle must be firmly attached to the bench frame before
the run up ramps are dismounted.
WARNING
! Always be extremely careful when working with jacks or
hydraulic equipment. Risk for falling or flying objects.
WARNING!
Make sure to lift on a safe lifting point, so that the vehicle
doesn’t slide during the lifting.
WARNING
! Block the wheels or engage the hand brake before tilting the
bench. Risk of unintentional rolling.
WARNING!
All electrical connections must be carried out by authorized
personnel. Risk for electric shock.
WARNING
! Forbidden to use the T48 on top of the drive on ramps. Risk
of falling off from the ramps.
WARNING
! Maximum one ramp support can be added on the other. Risk
of crushing injuries.
WARNING
! The floor underneath the bench with wheels must be level.
Always set the wheel brakes. Risk of unintentional rolling.
WARNING
: Risk of rolling bench. The wheel assemblies shall be locked
after the bench has been moved.
WARNING
! Always lift vehicle with hydraulic jacks on both sides of the
vehicle. Risk of personal injuries and material damage.
WARNING
! Make sure that the holding arm cam locks are tightened in 90°
angle to the bench tracks.
