Quick 42
Car-O-Liner Group AB
40724, EN - rev. 8, 2017-09
49
4.2.3
Tilting the bench, Type 1 pendant station
When the bench is in its lowest horizontal position (draw aligner height),
the bench can automatically be tilted.
1
Turn the switch to its middle position
2
Press the down button, and the bench tilt the drive-on side.
WARNING
! Block the wheels or engage the hand brake before tilting the
bench. Risk of unintentional rolling.
NOTE!
When the lift has been lowered and stopped by the safety latch and
further lowering is desired, the lift must be raised aprox. 10 mm (
⅓
in) to
release the latch. When the Down button is subsequently depressed fully, the
lift will be lowered past the safety latch stops.
