Car-O-Liner Group AB
Quick 42
62
40724, EN- rev. 8, 2017-09
4.7.2
Using Q201 spacers (optional)
When lifting a full frame vehicle or any vehicle with high lifting points
(for example when using T48 Support stand), Q201 Spacers can be used.
To achieve as much lifting height as possible it is necessary to close the gap
between lifting pad and lifting point.
The Q201Spacer kit consists of 2x3 spacers of various heights that can be
combined as seen in the examples below.
Lift the hydraulic cylinder and place the spacer between cylinder and holder
arm, according to pictures below.
To order the Q201 Spacer accessories kit (parts no. 41146), contact your
local Car-O-Liner distributor
.
WARNING
! Always lift vehicle with hydraulic jacks on both sides of the
vehicle. Risk of personal injuries and material damage.
WARNING
! Make sure that the holding arm cam locks are tightened in 90°
angle to the bench tracks. Risk of personal injuries and material damage.
WARNING
! Maximum hydraulic jack lifting capacity t is 900 kg (2000
lbs). Risk of personal injuries and material damage.
The Q201 spacers can be combined to
reach required lifting height.
The holding arm
cam lock tightened
in 90° angle to the
bench tracks.
