Car-O-Liner Group AB
Quick 42
86
40724, EN- rev. 8, 2017-09
9
When the brass screw is loosened the lift is slowly lowered all the
way to tilted position (make sure that the car can not roll off when
wheels are mounted)
The limit switch for tilting position will not be engaged when
carrying out this operation.
10
When loosening the brass screw and the lift is starting to move
slowly downwards, remove the safety supports and immediately
move away from the lift - SQUEEZE RISK WARNING! Wait
until the lift is in tilted position.
Remember to block the wheels or lock the brakes when carrying
out this operation!
11
Shut the valve, remove special tool and tighten the plastic nut.
Remove the guide at the security latch.
Repair the fault (see section 7.4) and reassemble the covers
9
10
11
