Car-O-Liner Group AB
Quick 42
76
40724, EN- rev. 8, 2017-09
the second position of the console holes (see 5.2, step 7).
Make sure that the locking peg fits in the hole of the bench.
8.
Lower the hydraulic jacks until the wheels stand on the
floor. Lower the jacks completely and remove them.
9.
Place the hydraulic jacks according to the picture.
10.
When mounting the two wheels on the opposite side
of the bench, repeat step 7-8.
11.
Disconnect the air and electricity.
NOTE!
When moving the unit (a vehicle mounted on the bench)
8
7
9
