Quick 42
Car-O-Liner Group AB
40724, EN - rev. 8, 2017-09
25
3.2.4 Crush
Guard
The crush guard is designed with a hinge mechanism.
WARNING!
Ensure that the crush guard is fitted so that it always drops
down of its own weight and does not jam. Risk of crushing injuries.
3.2.5
Loading Trolley/Roll Stop B57 (Optional)
The loading trolley is designed to be placed under a damaged or locked
wheel, thus allowing the vehicle to be winched on to the bench.
By turning the loading trolley upside down so that it does not roll freely, it
may be used as a roll stop. This stop must be placed under an undamaged
wheel when the vehicle is setup on the bench with the help of the hydraulic
jacks to prevent the vehicle from rolling.
WARNING!
During setup of the vehicle on the bench, care must be
exercised so that the vehicle does not roll or slide out of the hydraulic jacks
or bench mountings. Risk of crushing injuries.
3.2.6
Bench Mounting
The bench mountings are fitted to the tracks on the upper side of the bench.
They may be turned inward or outward depending upon the width of the ve-
hicle. (Variations of the mountings may differ from the illustrated model).
3.2.7
Cam Locks B626
Used for fitting bench mountings, track plates, etc.
